BASELIT S4 Video Instructions

si=_EK7L_iRYfcI3MrN&start=1" height="315" width="560">

 

 

Baselit S16 Lightsaber Operation Manual

• One Button Operations
• Two Button Operations

• More: S-RGB Lightsaber Operation Manual

One Button Operations

Power on: Hold the activation button until it illuminates

BLADE OFF

Ignition:

1. Press the activation button, or
2. Twist clockwise (if enabled)

Adjust Volume: Hold the button until it flashes once

Next Font:

1. Hold the button until it flashes 2 times, or
2. Angle the hilt upwards, hold the button and twist the hilt

Play Music:

1. Hold the button until the light flashes 3 times, or
2. Angle the hilt downwards, hold the button and twist the hilt

Flash on Clash on/off: Hold the button until it flashes 4 times

Motion Controls on/off: Hold the button until it flashes 5 times

Power off: Hold the button until the light turns off.

BLADE ON

Retraction:

1. Hold the activation button until it flashes 4 times, or
2. Twist clockwise (if enabled)

Smooth Swing: Move the hilt around

Spin: Spin or move the hilt quickly

Change Blade Effect: Angle the hilt upwards, hold the button and twist the hilt

Blaster Block: Tap the button

Flash on Clash: Hit the saber/blade

Lock Up: Hold the button until it flashes 1 time. Release then tap the button again to activate. Hold the button again to exit

Change Colour:

1. Angle the hilt downwards, hold the activation button and twist the hilt, or
2. Hold the button for 2 flashes and release to enter colour change mode. Tap the button to change colours. Hold the button for 1 flash to select the colour.

Two Button Operations

Power on: Hold the activation button until it illuminates

BLADE OFF

Ignition:

1. Press the main button, or
2. Twist clockwise (if enabled)

Adjust Volume: Hold the main button, then release

Next Font:

1. Tap the Aux button, or
2. Angle the hilt downwards, hold the Aux button and twist the hilt

Play Music:

1. Hold the button until the light flashes 3 times, or
2. Angle the hilt downwards, hold the Aux button and twist the hilt

Flash on Clash on/off: Hold the main button then release

Motion Controls on/off: Hold the button until it flashes 5 times

Power off: Hold the button until the light turns off or wait 20 minutes.

BLADE ON

Retraction:

1. Tap the main button, or
2. Twist clockwise (if enabled)

Smooth Swing: Move the hilt around

Spin: Spin or move the hilt quickly

Change Blade Effect: Angle the hilt upwards, hold the Aux button and twist the hilt

Blaster Block: Tap the Aux button

Flash on Clash: Hit the saber/blade

Lock Up: Hold the button until it flashes 1 time. Release then tap the button again to activate. Hold the button again to exit

Change Colour: Angle the hilt downwards, hold the Aux button and twist the hilt